You have no items in your shopping cart.
Close
Search
Filters

Buteline 16mm x 22mm Compression Adaptor

16mm Buteline x 22mm Copper Compression Fitting - BMC21
Manufacturer: Buteline
SKU: BMC21
 
*
£8.51 incl tax
- +

Buteline fittings are integrally strong and durable, moulded from thermoplastic and pre-fitted with annealed aluminium sleeves.

These maintenance-free plumbing fittings fittings, once jointed with Buteline Polybutene-1 pipe, form a unique and technically superior joint. Users will find the total concept much quicker and more economical than other available systems.

Buteline also have several innovative polymer alternatives to traditional brass fittings available, unique fittings that serve the same purpose (with some improvements in the case of the Bute-1) but allow for peace of mind and a potential cost-saving of up to 45%!

Designed using hydraulic engineering concepts proven on high pressure hydraulic fitting-to-hose connections, Buteline fittings have an outstanding feature which enable them to overcome high stresses experienced in installation and while in service. The aluminium rings transfer all loads applied on the tail section to the strongest section of the fittings, thereby eliminating the risk of failure.

Buteline fittings are available in 4 sizes -- 10mm, 16mm, 22mm and 28mm.

Fittings are technically superior, giving superb performance and durability over the long term with over 50 years of service life.


Main Advantages of Buteline Fittings

  • Lightweight, slim-line, one-piece design (no O rings or inserts), easy to use compared to bulky brass fittings
  • Post-clamp flare provides visual indication of joint completion
  • Able to provide metal-free contact with water supply, better hygiene, no leaching of harmful substances
  • Corrosion resistant, no scale build-up
  • Use is not geographically restricted by geothermal conditions or hard water regions
  • Easier to install, no time-wasting with bulky tools, sliding sleeves, brazing, or searching around for lost copper rings!

Advantages of Buteline fittings

Tests are carried out in accordance with relevant national and international requirements. Equivalent hoop stress pressures for up to 14.7MPa and forces of up to 13,100N are used in determining the strength and resistance to pull out of assembled joints. Test temperatures range between 20°C and 95 ± 1°C.

The Technically Superior Joint... Explained

Advantages of Buteline

  1. 8mm WIDE FORGED CLAMP
    Minimum working stress applied (approx. 0.5 ton per sq. in.) allowing pipe material to "flow" into insert tail grooves.
  2. 2mm WIDE FLARE
    No stress from clamping transmitted to insert tail or pipe at end of fitting. End of metal sleeve cannot impinge into pipe, even in bending.
  3. TAPERED ENTRY, SMOOTH BORE
    Minimise resistance to water flow.
  4. METAL REINFORCING SLEEVE
    Guarantees no stress break in this critical area.
  5. FULL LENGTH ALUMINIUM SUPPORT
    Provides additional rigidity and resistance to pull-off. Seals against dirt and moisture.
  6. SEALING RIBS
    Narrow lands with wide grooves, ensure clamp stress is transferred into the pipe joint efficiently.

Buteline fittings are integrally strong and durable, moulded from thermoplastic and pre-fitted with annealed aluminium sleeves.

These maintenance-free plumbing fittings fittings, once jointed with Buteline Polybutene-1 pipe, form a unique and technically superior joint. Users will find the total concept much quicker and more economical than other available systems.

Buteline also have several innovative polymer alternatives to traditional brass fittings available, unique fittings that serve the same purpose (with some improvements in the case of the Bute-1) but allow for peace of mind and a potential cost-saving of up to 45%!

Designed using hydraulic engineering concepts proven on high pressure hydraulic fitting-to-hose connections, Buteline fittings have an outstanding feature which enable them to overcome high stresses experienced in installation and while in service. The aluminium rings transfer all loads applied on the tail section to the strongest section of the fittings, thereby eliminating the risk of failure.

Buteline fittings are available in 4 sizes -- 10mm, 16mm, 22mm and 28mm.

Fittings are technically superior, giving superb performance and durability over the long term with over 50 years of service life.


Main Advantages of Buteline Fittings

  • Lightweight, slim-line, one-piece design (no O rings or inserts), easy to use compared to bulky brass fittings
  • Post-clamp flare provides visual indication of joint completion
  • Able to provide metal-free contact with water supply, better hygiene, no leaching of harmful substances
  • Corrosion resistant, no scale build-up
  • Use is not geographically restricted by geothermal conditions or hard water regions
  • Easier to install, no time-wasting with bulky tools, sliding sleeves, brazing, or searching around for lost copper rings!

Advantages of Buteline fittings

Tests are carried out in accordance with relevant national and international requirements. Equivalent hoop stress pressures for up to 14.7MPa and forces of up to 13,100N are used in determining the strength and resistance to pull out of assembled joints. Test temperatures range between 20°C and 95 ± 1°C.

The Technically Superior Joint... Explained

Advantages of Buteline

  1. 8mm WIDE FORGED CLAMP
    Minimum working stress applied (approx. 0.5 ton per sq. in.) allowing pipe material to "flow" into insert tail grooves.
  2. 2mm WIDE FLARE
    No stress from clamping transmitted to insert tail or pipe at end of fitting. End of metal sleeve cannot impinge into pipe, even in bending.
  3. TAPERED ENTRY, SMOOTH BORE
    Minimise resistance to water flow.
  4. METAL REINFORCING SLEEVE
    Guarantees no stress break in this critical area.
  5. FULL LENGTH ALUMINIUM SUPPORT
    Provides additional rigidity and resistance to pull-off. Seals against dirt and moisture.
  6. SEALING RIBS
    Narrow lands with wide grooves, ensure clamp stress is transferred into the pipe joint efficiently.
Products specifications
Size16mm
TransitionCompression 22mm
Products specifications
Size16mm
TransitionCompression 22mm
Customers who bought this item also bought
Picture of Buteline Elbow 16mm

Buteline Elbow 16mm

BE16
Buteline Elbow 16mm - BE16
£2.51 incl tax
Picture of Buteline Equal Tee 16mm

Buteline Equal Tee 16mm

BT16
Buteline Equal Tee 16mm - BT16
£3.52 incl tax
Buteline transition

Buteline 16mm x Elbow Soldering Adaptor 15mm

BFBE16
Female Soldering Tail 15mm Copper x 16mm Buteline Elbow - BFBE16
£3.34 incl tax
Picture of Buteline Female Back Plate Elbow 1/2” BSP x 16mm

Buteline Female Back Plate Elbow 1/2” BSP x 16mm

BEW16
Buteline Female Back Plate Elbow 1/2” BSP x 16mm - BEW16
£10.61 incl tax